Automobile Multimeter Gauge for EGT, Boost, Blue LED

Description

Automobile Multimeter for EGT, Boost and More...
Blue LED Display
This digital automobile gauge can be used to measure temperature, pressure and other important parameters such as battery voltage, current and air/fuel ratio.  Its bright LED display is easy to read from a distance as compared with many dim LCD type digital gauges. The programmable alarm will turn on a blue LED in the front panel to get driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed.  The brightness of LED display can be synchronized with headlight. When the headlight is turned on in the night, the display will be dimmed by the illumination signal. It can also be dimmed directly from the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy than the most of 3 digits gauges on the market. Its compact size (24 x 48 mm or 1x2") takes less space than a 52 mm round gauge.
For EGT measurement, the meter will work with all EGT sensors on the market, grounded or ungrounded. There is no input impendence matching requirement. It can display the temperature in either Celsius or Fahrenheit. It is probably one of the most accurate exhaust gas temperature (EGT) monitor on the market.
For boost pressure measurement, the meter will work with all MAP sensors as long as its pressure/output voltage relationship is known. It can display the pressure in either Bar, PSI, or user defined units with high resolution.  However, it will not display the pressure with two different type of units in one scale such as PSI for pressure range but inHg for vacuum range.
For water/oil temperature measurement, the meter can display from  -199 C to 250 C (or -199F to 500F) with 1 degree accuracy when used with our RTD sensor. It will also work with our liquid tight thermocouple based sensor, In addition, it can work with VDO 150C (300F) sensor with a limited display range (50-150C,
VDO sensor can only be displayed in Celsius with this gauge
).
For water/oil pressure measurement, the meter can work with either old style resistive pressure sensor or the modern style pressure transducer with linear voltage output. The meter offers a regulated 5V DC output for the power supply of the pressure transducer.
For air/fuel ratio measurement, it can be used to display either air/fuel ratio or lambda when interfaced with Innovate Motorsports' LC-1 wideband oxygen sensor controller. Please note, the meter cannot work as a stand along AFR with the oxygen sensor unless you are using a controller.
Specification
Input type
Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25 Pt100, Cu50,
P
ressure transducer,
0-375ohm
,
0-5V,
0-75mV,
Other transducer:
0-30 mV,
1-5V, 0-
10V, 0-10mA, 0-20mA, 4-20mA.
Display
One lines, Four digits. °F or °C, Bar, PSI, or user defined
Display resolution
1°C, 1°F, or 0.1°C, 0. 1°F, with Pt100
Display brightness control
12 V illumination control signal, or key pad
Accuracy
±0.2% or ±1 unit of full input range
Control mode
On-Off
Control output
Relay contact: 3A at 240VAC
Alarm
Relay (3 A rating) high/low alarm,
Recording function
Maximum, Max time, Minimum, Min time.
Recording time
100
hrs with 1 minute resolution.
Power consumption
<2 Watt
Power supply voltage rating
12 (8.5-16.5)VDC
Panel cutout dimension
22x45 mm
Dimension
24 x 48 x 75mm (1/32 DIN)
Click here for instruction manual
(for gauges with SN earlier than 201606, click
here
for manual)
Click here for EGT sensor installation guide
Click here to download Pressure Sensor Application Guide
Click here for water/oil temperature sensor application guide
Click here to download Voltage Measurement Application Guide
Click here to download Current Measurement Application Guide
Click here to download Guide for Boost Gauge Installation
Click here for engine fuel/oil pressure sensor installation guide
Click here for LC-1 Wideband Oxygen Sensor set up
Email us or call 770-569-8420 if you have any questions.
Payment:
We accept payments from
PayPal and Credit card
. Payment is expected to be made within 3 days after the auction ended.
Shipping:
Buyer shall agree to pay for Shipping and
Handling
(to cover eBay listing/final fees and Paypal fees) within the USA We usually ship on the following business day as soon as payment is received and cleared.
*Warranty:
A 90 day warranty (exchange only) is offered to protect our buyers from defective parts only. We are not liable for any damages caused due to improper use or abuse.
Note:
The gauge can only work with one sensor at a time. You may use an external mechanical switch to make it work with multiple sensors of the same type. It is not practical to switch two different types of sensor while you are driving because you need about 10 seconds to change input settings of the gauge.
Attention for international buyers. The shipping service provided by this listing is via USPS First Class air mail. The tracking number may not work for the country you live. For most countries, the tracking number will stop working once the package let USPS international mail sorting center in Miami or New York. The shipping time: For West and North Europe, Australia, New Zealand, Canada (except central region) 2-3 weeks. (It might be as short as one week when lucky, but that is not the general case). For South Europe, Russia, Asia: Central region of Canada: 3-4 weeks. For Middle East, Central and South America 5-6 weeks.
If you need faster shipping service such as Fedex express mail or EMS, please contact us before you place the order.  While carrier transit time and customs clearance time are beyond our control, please email us if your item is not delivered after the estimated delivery time stated above. Customer satisfaction is our focus and we will try our best to trace the package and offer solutions.