Aquatec CDP-8800 RO Booster Pump-CDP 8851-2JO3-B323 3/8"JG (Transformer Option)

Description

The single greatest investment in your RO system, to improve overall performance, is a booster pump. Supply water pressure is single greatest factor in determining water production rate, RO storage tank fill rate, and brine:permeate ratio. Installation of a booster pump will improve all of the aforementioned measures of system performance.Supply water pressure 70-90 psi Increase water production rate by as much as 50-80%Improve RO tank fill rate by as much as 400%Decrease brine water to drain by as much as 80%Extend membrane life Aquatec CDP-8800 Booster Pump (Model CDP-8851-2J03-B423). Three chamber diaphragm pump, self priming, and capable of being run dry. Ideal pump for boosting supply water pressure to RO systems 100-150 GPD. The pump is a must for homes with low supply water pressure (<40 psi). The pump delivers 1.2 LPM (533GPD) at 80 psi and 2.1 LPM (7GPD) in the fully open position. The pump comes standard with 3/8" John Guest inlet/outlet fittings and operates on 24VAC, requiring an optional110v/60 Hz transformer and pressure switch for pump operation. The transformer may be purchased as part of the pump package for a small up charge. An appropriate pressure switch can be purchased separately (eBay item number:153601698652). Included with the pump are two 1/4" push to connect x 3/8" stem reducing elbows for use with 1/4" tubing. SPECIFICATIONS:MOTOR:TYPE: 24 VAC, Permanent Magnet,Totally Enclosed, Non-VentilatedLEADS: 20 AWG, 6” LONGTEMP. LIMITS: This Motor is Not Equipped with ThermalProtection. For User Safety, OptimalPerformance, and Maximum Motor Life, TheMotor Surface Temperature Should Not Exceed150°F (66°C), as Shown on the Heat Rise Graph.PUMP DESIGN: 3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run DryTYPICAL APPLICATION: Pre-Filter Water Treatment (R.O. Boost)MATERIALS:HOUSINGS: NylonVALVES: EPDMDIAPHRAGM: SantopreneFASTENERS: Stainless SteelLIQUID TEMPERATURE:170°F (77°C) Max.Warranty: 2 years from date of purchaseInstallation instructions included.Note: For 36-75 GPD RO systems, select CDP 6800 booster pump.