2Pack Frigidaire WF3CB Pure-Source 3 Refrigerator Water Filter

Description

Product Description
Tested and Certified by WQA according to NSF/ANSI 42
Used only high-grade coconut carbon block.
Removes over 99% of the potentially harmful contaminants that may be present in your water
Model:  Frigidaire WF3CB
Temperature: 1-38 Degrees Centigrade (34-100 Degrees Fahrenheit)
Flow rate: 0.75 GPM (1.9LPM)
Pressure: 30-125 PSI
Capacity: 250 Gallons
Replacement Cycle: 6 Months
Compatible Models:
1706465, 242069601, 242069603, 242294501, AP4567491, P242069601, SWF3CB, WF3CB, WF3CB12
101057-A, 101057A, 101300-0110, 101300-A, 101300A, 111514, 197D6321P001, 29TR62, 4529117,
46-9905, 46-9991, 46-9996, 469905, 469991, 469996, 9905, 9991, 9996, AP3859302, AP3967843,
AP5788185, DF787, EFF-6013A, ERMWF, FXRC, FXRT, GESMARTWATER, GESMARTWATERFILTER,
GERF-100, GHPMWF, GHPMWFP, GWF, GWF-01, GWF-06, GWF01, GWF06, GWFA, GWFDS, HWF,
HWFA, HXRT, MWF3PK, MWF, MWF-INT, MWFA, MWFAP, MWFDS, MWFINT, MXRC, OPFG-RF300,
PC40677, PC61278A, PS981638, PS983115, PT11577906, RFC0600A, RWF-1060, RWF1060, SGF-G1,
SGF-G9, SGF-G11, WF-287, WF287, WR02X11020, WR02X11287, WR02X11290, WR17S12, WR2M3552,
WR97X100006, WSG-1, WSG-G1
Installation Instructions:
1. Press the push button to open the filter cover
2. Pull the old cartridge downward to remove
3. With new cartridge in the horizontal position, push the the cartridge into the manifold hold until it stops
4. Push it up in firmly until you cannot push up further
5. Push the filter cover until it clicks into place
6. After replacing flush approx. 3-4 gallons of water through filter before use