-40%
20" x4.5" Big Blue Whole House Filter Housing 1" Ports W/ Pressure Release-4Pack
$ 77.71
- Description
- Size Guide
Description
新建网页 1新建网页 1
20" BB Blue Whole House Water System Filter Housing 1" NPT w/ Pressure Release + Wrench and Bracket
This SimPure 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C).
This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
Filter cartridge size (H x W) (sold separately)
20 x 4-1/2 inches (508 x 114 mm)
Initial pressure drop at 15 gpm
1 psi
Maximum temperature
100 degrees F (37.8 degrees C)
Maximum pressure
90 psi
Maximum dimensions (H x W)
23-3/8 x 7-1/4 inches (594 x 184 mm)
Materials and structural integrity certification
NSF/ANSI standard 42
Please Note: This product is filter housing only. Filter cartridges are NOT included.
20" Sediment Filter
20" String Wound Filter
20" Pleated Filter
20" Carbon Block Filter
[COMPATIBLE 20 INCH CARTRIDGES]
American Plumber W5CPHD, WRC25HD20, Ametek GAC-20BB, RFC-20BB, AquaPure AP810-2, Bunn C-30, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, Cuno CFS210-2, Dupont HDC3001, Filter Specialist CMMF0520-45W1, Harmsco HB-20-5W, Hydronix SDC-45-2005, SPC-45-2005, iSpring FP25B, OmniFilter RS15, Pentek 155249-43, 155358-43, 255490-43, 255494-43, ECP5-20BB, GAC-20BB, P5-20BB, RFC20-BB, Plymouth Products GAC-20BB, Selecto 101-300, US Filter GAC-20BB, etc.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.
Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.